Tempered glass Glas.TR Platinum from Spigen is a product of the highest class and the highest degree of advancement, prepared in cooperation with the Whitestone company.
The experience of both manufacturers in glass processing, over two decades, has resulted in innovative effects in the protection of modern curved screens.
A patented method was used for installation, which consisted in applying the glue and then hardening it with ultraviolet light.
The degree of hardness of the surface of Glas.TR Platinum glass is rated at 9H, which translates into scratch resistance even with sharp objects, and additionally coating it with an oleophobic coating reduces the occurrence of fingerprints.
Glas TR glass. Platinum is compatible primarily with every Spigen case and most cases available on the market.
Check how to install: https://www.youtube.com/watch?v=9raAwiw8xrE&feature=youtu.be
* We do not recommend the use of 3D glass without any housing.
** The assembly has been simplified to the maximum, but you must remember to read the instructions before installation and watch the instructional video and follow all the steps set by the manufacturer, only in this way you will get 100% satisfaction.
*** Glass after dismantling does not leave any trace on the screen.
**** The higher price than our other lenses is the result of a huge technological advantage over them. This is not due to the higher resistance of the glass, so the glass under the influence of falling or pressure has the right to break / crumble like any other, while protecting the screen.
1) Begin installation in the bathroom right after bathing - the steam will absorb all the dust from the atmosphere and it will not disturb your installation.
2) Clean and degrease the screen surface thoroughly, then use a dry cloth to polish it to a shine.
3) Use a tape to cover the speaker.
4) Pour the liquid into the very center of the device.
5) Install the glass as evenly as possible, this stage can also be corrected before the surface hardens when the liquid is on the screen along with the glass.
6) Use a UV lamp to harden the glass in five places for 15 seconds.
7) Clean the phone thoroughly.
8) Remove and re-add fingerprints.
9) Enjoy a job well done.
- 100% Original
- Packed in the original packaging
- Tempered glass with a thickness of 0.3 mm
- Resistance up to 9H
- Does not affect touch sensitivity
- Equipped with a nano coating that resists grease and fingerprints
- Dimensions: 159x79mm
1 x Spigen Glass Tr. Platinum
1 x UV Lamp
1 x Installation Tools
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.